Skip to content
Triplett 2022 Full Product Line Catalog: Volume 1 Now Available!
Triplett 2022 Full Product Line Catalog: Volume 1 Now Available!
triplett 8075 Security Camera Tester

CamView IP Pro- X™ HD Full Touch Screen Display IP and Analog Security Camera Tester - (8075)

Best Seller
Free Shipping
by Triplett
$749.99
SKU 8075
614395002374



The CamView IP Pro-X  is designed for installation and maintenance of analog SD, analog HD and network HD video surveillance systems. It will guide you through a step-by-step process to test the functionality of IP cameras, whether they are connected to an existing network or directly attached to Tester. Read More >



DESCRIPTION

The CamView IP Pro-X  is designed for the installation and maintenance of analog SD, analog HD and network HD video surveillance systems. It will guide you through a step-by-step process to test the functionality of IP cameras, whether they are connected to an existing network or directly attached to the Tester. You can adjust the camera’s settings, and record still images or video from the selected camera. You can also check the audio signal from the camera if it is equipped with a microphone. If the camera is directly connected, the Tester will provide POE voltage to power the camera. Comes complete with (2) Li-ion batteries, Universal AC adapter/charger with 4 plugs, Ethernet cable, BNC/BNC cable, microUSB to USB cable, RS485 cable with extra screw terminal, audio cable, 12V camera power cable, lanyard and carrying case.

CATEGORY: SECURITY CAMERA TESTERS

Features
  • Works with SD Analog, AHD 3.0, HD-CVI 3.0, HD-TVI 3.0, H.264, H.265 IP, NTCS/PAL, and all ONVIF enabled IP cameras
  • USB, BNC, RJ45 and HDMI ports
  • WiFi for connecting to WiFi cameras and to create a WiFi hotspot
  • 25W PoE and 12VDC camera outputs
Product Overview
CamView HD Pro (8065) CamView IP Pro-8W (8066) CamView IP Pro (8070) CamView IP Pro+ (8071) CamView IP Pro-D (8073) CamView IP Pro-X (8075)
CamView HD Pro (8065) CamView IP Pro-8W (8066) CamView IP Pro (8070) CamView IP Pro+ (8071) CamView IP Pro-D (8073) CamView IP Pro-X (8075)
Display 4" TFT 4" IPS Touchscreen 4" TFT 4" TFT 4" TFT 7" TFT Touchscreen
SD Analog ✓ ✓ ✓ ✓ ✓ ✓
AHD / CVI / TVI AHD 2.0 / CVI 3.0 / TVI 3.0 AHD 2.0 / CVI 3.0 / TVI 3.0 AHD 2.0 AHD 2.0 / TVI 2.0 AHD 3.0 / CVI 3.0 / TVI 3.0 AHD 3.0 / CVI 3.0 / TVI 3.0
IP (ONVIF Only) H.264 and H.265 H.264 H.264 H.265 H.264 and H.265
Record Snapshot and Video ✓ ✓ ✓ ✓ ✓ ✓
DHCP Server ✓ ✓ ✓ ✓ ✓
12VDC Output ✓ ✓ ✓ ✓ ✓ ✓
POE Output ✓ ✓ ✓ ✓ ✓
TDR Testing Ethernet Only Ethernet Only Ethernet Only Ethernet Only
Built-in DMM ✓
Specifications
  8075
IPC Protocol ONVIF, RTSP, RTP
Ethernet Test 10/100M/1G detect; Loop detect; DHCP client & server; traffic detect; datalink quality detect
IPC Test Discover the device, real time video, camera config, PTZ test, discover ONVIF device
WiFI Test Support 2.4G & 5G; WiFi connection; WiFi list; Delay detection; packet loss rate test
Spectrum Test Spatial frequency band signal scanning & detection; spatial noise signal detection
Poe Test power PSE test -The tester supplies power (25W) / PD test-receives the power (802.3af/802.3at)
Analog Video Test NTSC/PAL/HD-CVI 3.0/AHD 3.0/HD-TVI 3.0
Video In/Out BNCs; supports 8 level digital zoom
HDMI Signal Test Can receive 720p, 1080p
Can transmit various test images 720p & 1080p
12V Power Output 12V/2A output interface
TDR Test Test network cable (4 pair) length; Max 427 to 656ft (130 to 200m); Accuracy 3.3ft (1m)
Coaxial PTZ Control Test CVI protocol (Dahua); AHD protocol (Pelco c); TVI protocol (Hikvision)
485 PTZ test More than 30 protocols
Display 7” TFT touchscreen , 1920 x 1200, 16.7M colors
Power (2) Lithium-ion batteries; 10 hour work time
Dimensions/Weight 9.3 x 5.2 x 1.8” (236.5 x 133.4 x 45.4mm) / 2lbs (907g)
Includes
  • (2) Lithium-Ion Batteries,
  • Universal AC Adapter/Charger with (4) Plugs
  • Ethernet Cable
  • BNC/BNC Cable
  • MicroUSB to USB Cable
  • RS485 Cable with Extra Screw Terminal
  • Audio Cable
  • 12V Camera Power Cable
  • Lanyard
  • Carrying Case
Downloads

Datasheet
User Manual

FAQs
  • Q. I am getting wrong password and username message
    A. User name and password information is not an error of the tester. This information is the camera only. Our testers do not have any passwords or user information requirements. If you are having trouble with passwords you need to contact the camera manufacturer or refer to their manual for default user name password information or details on any special set up specifications they may have for initializing their cameras.

  • Q. How do I setup an AXIS Camera to allow ONVIF Users
    A. Download our Setting up an Axis Camera to allow ONVIF Users Document
    and Axis ONVIF Setup V178 Document


  • Q. Is there a software upgrade that will provide all analog formats to my device?
    A. Updates for the unit are performed by connecting the unit to a network via the rj45 port, going into settings, scrolling down to “System Upgrade” and hitting the right arrow. The unit will automatically look for any new updates available. This process id detailed in the user manual section 4.7.3.
    When viewing analog cameras the format and pattern can be changed in the “Analog video generator” section of the main menu.