CamView IP Pro+™ IP and Analog Security Camera Tester: H.265, AHD 2.0, HD-TVI 3.0, HD-CVI 3.0, and NTSC/PAL - (8071)
The CamView IP Pro, Pro+, and Pro-D are designed to facilitate the installation and maintenance of surveillance video equipment. The Tester works with both Standard Definition analog NTSC/PAL camera systems, High Definition Analog, and ONVIF conformant IP (Ethernet) camera systems. Read More >
The CamView IP Pro, Pro+, and Pro-D are designed to facilitate the installation and maintenance of surveillance video equipment. The Tester works with both Standard Definition analog NTSC/PAL camera systems, High Definition Analog, and ONVIF conformant IP (Ethernet) camera systems. Also, the testers provide an RS485 port for PTZ control of analog PTZ cameras and can provide POE for operating IP cameras, or 12VDC (not to exceed 2A) to power analog cameras. The IP Camera Tester allows you to perform Ethernet and network tests, capture video (snapshots and video recording), playback video, generate video test patterns for monitor checking and perform analog camera testing. They also allow you to check microphone/audio sources and even provide a bright flashlight function. Both recorded images and video can be transferred to PCs or other devices via the USB port connection.
CATEGORY: SECURITY CAMERA TESTERS
- IP (H.265) and Analog (AHD 2.0, HD-TVI 3.0, HD-CVI 3.0, and NTSC/PAL) security camera tester
- Provides an RS485 port for PTZ control of analog PTZ cameras
- POE for IP cameras or 12VDC to analog cameras
- Ethernet and network tests; Capture snapshots and video recordings; Generate video test patterns for monitor checking
- Built-in keyboard
- Analog Camera Test & RS485 PTZ Control Test
- Powers Analog cameras - 12 VDC @ <2A
- 10M/100M/1G Ethernet Link Test
- Packet Loss Test
- Ethernet Loop Detection
- Record, save and export full IP camera reports
- IP camera tests including: discover the camera, view camera’s video, configure camera’s parameters, etc.
- Powers IP cameras - no need for external PoE
- Works with or without a network.
- Built-in DHCP server allows you to set & assign IP addresses to cameras, auto-detect IP settings on networks, plus Ping, Sniff & List Subnet
- Works with the most popular IP* cameras PLUS NTSC/PAL, AHD & TVI Analog cameras!
- *AHD & TVI (Up to 2mpx)
Triplett CamView IP Pro+ 8071 Ruggedized IP & Analog NTSC/PAL, AHD, and HD-TVI Camera Tester
No Network. No Power. No Problem
The CamView IP Pro+ works with IP and Analog SD cameras, as well as AHD and HD-TVI models to allow you to test, verify, and troubleshoot cameras, cables, and networks even before the network is setup, or even before the power is setup. It works with the most popular AHD, HD-TVI, IP, and Analog NTSC/PAL cameras. Compact, lightweight, and ruggedized for real-world use, the CamView IP Pro also features an intuitive user interface.
With an intuitive user interface, and no need to download Apps or manufacturer-specific software, the CamView IP Pro is your security camera test solution.
No Network Required
The built-in DHCP server allows you to set and assign IP addresses to cameras, auto-detect IP settings on networks, as well as ping, sniff, and list subnet. You can also record, save, and export full IP camera reports.
No Power Required
The CamView powers IP cameras without the need for external PoE and powers analog cameras--12 VDC @ < 2A. IP camera tests include: discover the camera, view camera's video, configure camera's parameters, and more.
The CamView IP features an analog camera test, a RS485 PTZ control test, and TDR cable tests. Ethernet tests include: 10M/100M/1G Ethernet link test, packet loss test, and Ethernet loop detection.
|CamView HD Pro (8065)||CamView IP Pro-8W (8066)||CamView IP Pro (8070)||CamView IP Pro+ (8071)||CamView IP Pro-D (8073)||CamView IP Pro-X (8075)|
|Display||4" TFT||4" IPS Touchscreen||4" TFT||4" TFT||4" TFT||7" TFT Touchscreen|
|AHD / CVI / TVI||AHD 2.0 / CVI 3.0 / TVI 3.0||AHD 2.0 / CVI 3.0 / TVI 3.0||AHD 2.0||AHD 2.0 / TVI 2.0||AHD 3.0 / CVI 3.0 / TVI 3.0||AHD 3.0 / CVI 3.0 / TVI 3.0|
|IP (ONVIF Only)||H.264 and H.265||H.264||H.264||H.265||H.264 and H.265|
|Record Snapshot and Video||✓||✓||✓||✓||✓||✓|
|TDR Testing||Ethernet Only||Ethernet Only||Ethernet Only||Ethernet Only|
|IP (ONVIF only)||x||x||x||x|
|TDR Testing||Ethernet only||Ethernet only||Ethernet only||Ethernet only|
|Analog Video Generator||x||x||x||x|
|HD Video Generator||up to 1080P 30fps|
|Camera Report||IP only||IP only||IP only||IP only|
|Keyboard||Full QWERTY||Full QWERTY||Full QWERTY||Full QWERTY|
|Screen||Backlit 4" 16.7M color TFT||Backlit 4" 16.7M color TFT||Backlit 4" 16.7M color TFT||Backlit 4" 16.7M color TFT|
|Resolution||800 x 480||800 x 480||800 x 480||800 x 480|
|Dimensions||7.5 x 4.4 x 1.5" (190 x 113 37mm)||7.5 x 4.4 x 1.5" (190 x 113 37mm)||7.5 x 4.4 x 1.5" (190 x 113 37mm)||7.5 x 4.4 x 1.5" (190 x 113 37mm)|
|Weight||3.5lbs (1.6kg)||3.5lbs (1.6kg)||3.5lbs (1.6kg)||3.5lbs (1.6kg)|
- Rechargeable Battery
- Tool Bag with Shoulder Strap
- POE Power Injector, Network Cable
- BNC Cable
- RS485 Cable
- 12V Power Output Cable
- Audio Cable
- USB Cable
Q. I am getting wrong password and username message
A. User name and password information is not an error of the tester. This information is the camera only. Our testers do not have any passwords or user information requirements. If you are having trouble with passwords, you need to contact the camera manufacturer or refer to their manual for default user name password information or details on any special set up specifications they may have for initializing their cameras.
Q. How do I setup an AXIS Camera to allow ONVIF Users
A. Download our Setting up an Axis Camera to allow ONVIF Users document and Axis ONVIF Setup V178 document.
Q. Is there a software upgrade that will provide all analog formats to my device?
A. Updates for the unit are performed by connecting the unit to a network via the RJ45 port, going into settings, scrolling down to “System Upgrade,” and hitting the right arrow. The unit will automatically look for any new updates available. This process is detailed in the user manual section 4.7.3.
When viewing analog cameras, the format and pattern can be changed in the “Analog video generator” section of the main menu.