Commercial and Residential Combination AC Line Splitter and GFCI Receptacle Tester: Tests 3-Wire Receptacles - (ET200)

Combines a GFCI Tester and AC Line Splitter in one tool so that you can check outlet wiring, measure voltage, and use your clamp meter to measure current up to 15A. When measuring current you can without breaking circuit. Read More >

DESCRIPTION

Combines a GFCI Tester and AC Line Splitter in one tool so that you can check outlet wiring, measure voltage, and use your clamp meter to measure current up to 15A. When measuring current you can without breaking the circuit. Clamp around the X1 position for a direct current reading or use the X10 position to display low current readings multiplied by 10. You can also detect faulty wiring in 3-wire receptacles. The lights display 5 wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse. There is an easy to read fault label on both sides for receptacles with ground up or ground down installation. At the push of a button, you can test GFCI for proper operation. Two very useful and necessary tool for residential and commercial electricians, home inspectors, and DIYers. This product is cETLus listed.

CATEGORY: GFCI RECEPTACLE TESTERS

Features

• Combines a GFCI Tester and AC Line Voltage Splitter in one tool
• Check outlet wiring, measure voltage, and use your clamp meter to measure current up to 15A without breaking the circuit
• Lights display 5 wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse
• Test GFCI for proper operation

Product Overview

Current Measurement Rings When connected between the 120V AC wall outlet and the device under test, a clamp meter can be clamped around one of the two test openings in the ET200. One opening provides a one-to-one current reading; the other provides a times-ten (x10) reading so that small current will display with better resolution on your clamp meter.	Easy-to-Read, Dual-Side Fault Charts Easy-to-read fault label each side, designed for receptacles with ground up or ground down installation. Lights display 5 wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse.	Simple Push-Button Outlet Tester For use on 110-125 VAC receptacles. Test GFCI receptacles for proper operation and detect faulty wiring in 3-wire receptacles.

Applications

Combines two useful and necessary tools for residential and commercial electricians, home inspectors, kitchen and bath installers, apartment/condo property managers, DIY'ers and handymen.

	9610 Plug-Bug	ET100	ET200
Applications	Test wall outlets for proper wiring and identify live outlets	Test wall outlets for proper wiring and identify live outlets	Test wall outlets for proper wiring and identify live outlets. Measure voltage, and use your clamp meter to measure current

Specifications

Input Voltage	120V ± 10% Maximum
Current	15A
Safety Category	CAT II 300

Downloads

Datasheet
User Manual