English
Chinese (Traditional)
French
German
Hindi
Italian
Japanese
Spanish
Vietnamese
Used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester, Comparison mode helps to identify the correct breaker when the signal strengths are very close
Features
- Detect faulty wiring in 3-wire receptacles
- Lights display 6 wiring faults:
Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse, Hot on Neutral with Hot Open - Test GFCI for proper operation
- Built-in Non-Contact Voltage Detector
(80-300V, CAT III-300V) - Includes Transmitter, Receiver and 9V Battery
Applications
One person operation tool for residential and commercial electricians, home inspectors, kitchen and bath installers, apartment/condo property managers, DIY’ers and handymen. The tool features an exclusive comparison mode that identifies the correct breaker, even when signal strengths are very close. The receiver also functions as a Non-Contact Voltage Detector and the transmitter also enables users to detect faulty wiring in 3-wire receptacles and tests GFCI for proper operation.
Specifications
| CBF200 | |
| Receiver | |
| Power | 9V Battery |
| Auto Power Off | After 10 minutes |
| NCV Detector Range | 24 to 600VAC |
| Safety Category | CAT III-300V |
| Transmitter | |
| Voltage | 120VAC |
| Frequency | 47-63Hz |
| GFCI Leakage Current | 7mA @ 120VAC |
| Safety Category | Transmitter: CAT II-300V; NCV: CAT III-300V |
| Dimensions | Transmitter 4.7 x 2.5 x 1.3” (118.5 x 63 x 32mm) Receiver 5.1 x 2.4 x 1.5” (130 x 62 x 36.9mm) |
| Weight | 9.8oz (260g) |