Skip to content
Triplett Full Product Catalog: Volume 27 Now Available
en English
zh-tw Chinese (Traditional)en Englishfr Frenchde Germanhi Hindiit Italianja Japanesees Spanishvi Vietnamese
10Gb Multifunctional Low Voltage Cable/Network Tester - (LVPRO40)

10Gb Multifunctional Low Voltage Cable/Network Tester - (LVPRO40)

Free Shipping*
by Triplett
SKU LVPRO40
614395005542
$1,094.00 - $1,094.00
$1,094.00
$1,094.00 - $1,094.00
$1,094.00

Extended Lead Time: Up to 11 business days for NIST Calibration

Product Information

  • The Triplett Model LVPRO40 10Gb Multifunctional Low Voltage Cable/Network Tester offers a comprehensive solution for LAN installers and repair technicians.
  • It tests and traces both twisted pair (CAT5E/6/6A/7) and coax cables, and checks twisted pair continuity, opens/shorts, reversals, and split pairs.
  • 8 RJ45 remotes allow for the testing of up to 8 cables.
  • It runs a variety of cable testing procedures, such as wiremap, timing tests (delay, skew), impedance measurement, Ethernet switch port blink, cable length, PoE volts, loaded battery test, and 10M/100M/1G/10G indication.
  • It gives you the ability to store and print up to 250 test reports.
  • Featuring a 2.8" backlit graphical LCD, built-in RJ11, RJ45, and coax ports, this tester ensures optimum visibility and easy connection.
  • Use the tone mode to trace cables effortlessly.
  • Its auto power off feature and 70VDC input protection add to the convenience and safety.
  • Includes (8) remotes, USB cable, RJ45 to RJ45 connector cable, RJ45 cable with alligator clips, and (3) AA batteries.

CATEGORY: LOW VOLTAGE TOOLS

  • Test and trace CAT5E/6/6A/7 twisted pair and coax cables efficiently
  • Works with virtually all cable types including twisted pair, coax, speaker cable, alarm cable, and others
  • Adjustable VOP (velocity of propagation) allows the LVPRO40 to be calibrated to your unique cable type
  • Identify continuity, opens/shorts, reversals, and split pairs in twisted pair cables
  • Measure cable distance to open or short (TDR)
  • Detect PoE presence and identify whether it's endspan or midspan (802.3AF, 802.3AT, 802.3BT)
  • Perform thorough Ethernet port tests for reliable networking
  •  RJ45 remotes (included) allow for the testing of up to 8 cables or identifying wall jacks
  • Built-in tone generator
  • Store and print up to 250 Reports
  LVPRO40
Cable Types UTP, FTP and SSTP twisted pair,
telephone, speaker and alarm wire
50Ω, 75Ω, 93Ω coax cable
Cable Tests Opens, shorts, reversals, split pairs, wiremap, propagation delay, skew, ohms Feet/metric selectable
Cable Length Test Range: 1999ft (610m) Resolution: 1.5ft (0.5m)
Adjustable and standard VOP settings
RLQ (Return Loss Quality)
Accuracy: ±(2% + 3ft/1m)
Network Devices 10M/100M/1G/10G advertised speed and cable pairs used
PoE pairs and cable pairs used
CCTV camera video signal: measure peak to peak volts
CATV (cable TV) requires min 30mV peak to peak signal
Battery test: 100mA loaded test for 12V alarm
POE detection POE standards: 802.3AF, 802.3AT, 802.3BT
Ethernet Port Test Yes
Cable Location Yes
Port Blink Lights the LED on the port switch
Power (3) AA batteries
Dimensions 7.1 x 3.2 x 1.5” (181 x 81 x 37.2mm)
Weight 9.2oz (260g)
  • Includes (8) remotes
  • USB cable
  • RJ45 to RJ45 connector cable
  • RJ45 cable with alligator clips
  • (3) AA batteries
Datasheet
User Manual (PDF)
To resolve the time tracking issue on your LV-Pro tester, you need to synchronize it with the correct date and time. Connect the LVPRO to a PC, open the LVPRO manager software, and select “Tester” followed by “Tester Clock”, then choose “Set Clock”. This action should align your LVPRO's internal clock with the PC's time, ensuring accurate date and time stamps on all future tests.
In the LV-Pro-30 tester, the tests run continuously and will only pause to reset. If the unit initially shows a pass and then switches to a fail, it reflects the test resetting itself. A cable that actually fails should not show a pass at any point. This behavior is part of the tester's continuous testing process and not an indication of switching between 568B and 568A standards.
The CDM software you need is included in the zip file with the Manager software. Visit our software page at https://www.triplett.com/pages/software and download the software for any of the LVPRO models listed there. Inside the downloaded zip file, you'll find two executable files: setup.exe and cdm21216_setup(1).exe. Run and install both to get your model 30SR up and running.
While not all tone probes will work with the LVPRO30SR, some styles, such as the RWC probe, are compatible. We are in the process of transitioning to a universal style probe that will be compatible with most of our units, including the LVPRO30SR. The "Tone Probe for LVPRO Series (TVR-PROBE)" is available for purchase and is compatible with the LVPRO30SR. Here is a link to the probe: [TVR-PROBE].
The LVPRO series does not test to the ANSI/TIA standard. The unit tests continuity, length, delay, skew, and impedance.
 Need Help? Our experts are here to help you 
Contact Us