DESCRIPTION

The POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. There is a test mode that can determine if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used. For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, uses system power when connected to a device.

CATEGORY: POE TESTERS & EQUIPMENT

Features

4 LEDs indicate IEEE802.3af or 802.3at/bt standard
Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
2 Yellow LEDs indicate reversed polarity for power type
Display alternates between Voltage, Current and Power with a step button for selecting specific data to display

Product Overview

professional power over ethernet poe tester

PoE Tester Pro

Detects PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span, Midspan, or across all 4 pairs. When used inline, the display alternates between Voltage, Current and Power with a step button for selecting specific data to display.

Triplett Solutions for Every Contractor


Four LEDs indicate IEEE802.3af or 802.3at/bt standard.	Dual 7-digit LEDs indicate power source either End Span (1/2, 3/6) or Mid Span (4/5, 7/8) or across all four pairs.	Determines standard PoE or non-standard passive PoE.	Two yellow LEDs indicate reversed polarity for power type.

professional security camera installation poe detector and tester

Applications

This tester helps to speed up the installation and troubleshooting of PoE system devices. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your

Specifications

	POE2000
Connector Interface	2X RJ45 (PSE & PD Test Jacks)
Voltage Range	Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V)	990mA/50W per mode; Total 2A/100W
Function Selection Mode	T Mode: for detecting PSE status
	N Mode: for determining non-standard PoE + inline testing
	I Mode: for testing & monitoring real-time power status
Display	4 LEDs indicate IEEE802.3af or 802.3at/bt standard
	Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
	2 Yellow LEDs indicate reversed polarity for power type
	Display alternates between Voltage, Current and Power
Step Button	For selecting specific data to display
Power	Uses system power when connected to a device
Dimensions/Weight	3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g)

Downloads

Datasheet
User Manual

FAQs

Q. Does this device pass the ethernet data while doing the power analysis?
A.The POE2000 passes PoE only when inline. We do offer the POE1000IL which will pass data while running inline.

Description

The Triplett POE3000 In-Line PoE Tester Pro is a valuable tool that streamlines the installation and troubleshooting of PoE (Power over Ethernet) system devices. It simplifies the process by offering various detection capabilities. The tester's 4 LEDs indicate whether it complies with IEEE802.3af or 802.3at/bt standards. It can detect PSE (Power Sourcing Equipment) type/class, power source, polarity, voltage, current, power, and determine if it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs.

For added convenience, the tester can differentiate between standard PoE (36 to 60V) and non-standard (11 to 60V) passive PoE, making it suitable for various PoE setups. It also includes 2 yellow LEDs to indicate reversed polarity for power type.

The POE3000 provides inline power level monitoring that alternates between displaying Voltage, Current, and Power. It incorporates a step button for selecting specific data to display. No batteries are required as it utilizes system power when connected to a device.

CATEGORY: POE TESTERS & EQUIPMENT

Features

Passes Thru Voltage and Data: This in-line PoE tester not only detects various PoE parameters but also allows the passage of both voltage and data, ensuring seamless power and data transmission in your PoE system.
Streamlines Installation and Troubleshooting:
- Helps to speed up the installation and troubleshooting of PoE system devices.
IEEE802.3af/802.3at/bt Detection:
- 4 LEDs indicate IEEE802.3af or 802.3at/bt standard compliance.
Comprehensive Detection:
- Detects PSE-type/class, power source, polarity, voltage, current, power, and determines End Span, Midspan, or across all 4 pairs.
Standard vs. Non-Standard PoE:
- Determines standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE.
Polarity Reversal Indication:
- 2 Yellow LEDs indicate reversed polarity for power type.
Inline Power Level Monitoring:
- Alternates between displaying Voltage, Current, and Power with a step button for data selection.
No Battery Required:
- Uses system power when connected to a device.
Complete Package:
- Includes the Inline PoE Tester Pro for your convenience.
Warranty:
- Backed by a 1-year warranty for your peace of mind.

Product Overview

PoE Tester Pro

Triplett Solutions for Every Contractor


Four LEDs indicate IEEE802.3af or 802.3at/bt standard.	Dual 7-digit LEDs indicate power source either End Span (1/2, 3/6) or Mid Span (4/5, 7/8) or across all four pairs.	Determines standard PoE or non-standard passive PoE.	Two yellow LEDs indicate reversed polarity for power type.

Applications

Specs

	POE3000
Connector Interface	2X RJ45 (PSE & PD Test Jacks)
Voltage Range	Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V)	990mA/50W per mode; Total 2A/100W
Function Selection Mode	T Mode: for detecting PSE status
	N Mode: for determining non-standard PoE + inline testing
	I Mode: for testing & monitoring real-time power status
Display	4 LEDs indicate IEEE802.3af or 802.3at/bt standard
	Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
	2 Yellow LEDs indicate reversed polarity for power type
	Display alternates between Voltage, Current and Power
Step Button	For selecting specific data to display
Power	Uses system power when connected to a device
Dimensions/Weight	3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g)

Datasheet

Manual

User Manual

Country

Country

In-line PoE Tester Pro - (POE3000)