Skip to content
Triplett Full Product Catalog: Volume 27 Now Available
en English
zh-tw Chinese (Traditional)en Englishfr Frenchde Germanhi Hindiit Italianja Japanesees Spanishvi Vietnamese
Triplett Real World Certifier™ and Powel Panel™ CAT 5/6 Cable and Power Test Kit - (CPK1000IL2)

Real World Certifier™ and Power Panel™ CAT 5/6 Cable and Power Test Kit - (CPK1000IL2)

Best Seller
Free Shipping*
by Triplett
SKU CPK1000IL2
7 49536 54180 8
Out of Stock
$1,122.00 - $1,122.00
$1,122.00
$1,122.00 - $1,122.00
$1,122.00

Extended Lead Time: Up to 11 business days for NIST Calibration

Product Information

The Triplett Model CPK1000IL2 has been discontinued

This product has been replaced with the RWV10G

 

The RWC does not utilize .fca2 files. Instead, all test results from the RWC are saved directly as Excel files. To view your data, the .fca2 file should be converted to an Excel format.
The CD distribution has been discontinued. All software downloads can now be accessed directly from the Triplett website's download page. Please visit the "Download Triplett Product Software" section on the Triplett Test Equipment & Tools website for your needs or in the Downloads section on this page.
The driver.exe file is part of the software download from our website. You must open the downloaded file then the setup zip file to access it.
The RWC is specifically for testing UTP (Unshielded Twisted Pair) cable. Shielded cables will alter the impedance and the device reading will not be accurate. The LVPRO30 and the LVPRO30-SR can perform cable tests on shielded and unshielded cables.
Only the left hand port of the RWC is used for cable tests and only the right side may be used for port tests. Using the wrong side for the wrong test could result in damage to the unit and cause faulty cable readings.
The recommendation on the product is to test cables no less than 3 feet for best accuracy. However we successfully run tests on 15in patch cable in house. The tests just take a little extra time.
MID refers to a Midspan device that uses specific cable pairs to transmit power. When END and MID are both lit up (along with all cable pairs) it means the device is using all pairs on the cable for power.
 Need Help? Our experts are here to help you 
Contact Us