Skip to content

LAN Tester with Remote Probe for Hubs, Switches, PCs, and Cables - (TVR10/10/100)

$199.97
SKU TVR101001000

TVR10/100/1000 LAN Tester is comprised of a "Main unit" and a "Remote Probe". The Main unit performs the bulk of the tests, such as determining the LAN device type (is it a hub/switch or PC?), the LAN speed and duplex (10, 100, 1000 MB/s, half or full duplex) and whether PoE (Power over Ethernet) is present without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones placed on the cable by the Main Unit) and to test the wiring of the cable (by decoding and displaying wiring information placed on the cable by the Main Unit).

Product Overview
Broad Capabilities TVR10/100/1000 helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your 10, 100 and 1000 Base-T LAN. You can even go inline between two LAN devices and determine the final negotiated speed and duplex of the link. Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs. The TVR10/100/1000 has been designed to test LAN devices and cabling to the 10, 100 and 1000 Base-T standard. This includes wiring paired to EIA(TIA)568B (also called AT&T258A or simply "AT&T"); and EIA(TIA)568A. EIA(TIA)568B is the most popular scheme for 10, 100 and 1000 Base-T cabling, while EIA(TIA)568A is the most popular scheme for ISDN cabling. USOC pairing (typically used for telephones) is not compatible with the Base-T standard and is therefore not tested by the TVR10/100/1000. To accomplish its goals, the TVR10/100/1000 performs tests that, prior to the TVR10/100/1000, required 7 different test sets. The multi-functionality is integrated to provide a combination of quick results that are not available in any other tester.The creative combination of these tests and other features yield an efficient, time-saving tester.
Features
  • Ideal solution for testing, verifying, and repairing 10, 100, and 1000 Base-T Networks
  • Consists of Main unit and Remote Probe
  • Main unit plugs into active hubs, switches and PCs to verify 10, 100 or 1000 Base-T operation
  • Instantly displays:
    • Device type (hub/switch or PC)
    • Speed (10, 100, 1000 MB/s)
    • Duplex of link (half, full)
    • PoE detection (end span, mid span)
  • Connects inline between two LAN devices to determine final negotiated speed and duplex of the link
  • Verifies which cable pairs are wired and whether they are straight thru or crossover
  • Tests for existence of LAN device connected at end of cable
  • Locates faulty hubs, switches, PCs, cables, and cable connections that affect LAN performance
  • Remote probe traces cable locations by detecting tone generated by Main unit
  • Straight thru/crossover cable simulator indicates type of patch cable required
 Specifications
Includes
  • 1 - Main Unit
  • 1 - Remote Probe Unit
  • 1 - Set of Batteries
  • 2 - RJ45 to RJ45 Jumpers
  • 1 - Protective Pouch
  • 1 - Manual

 

 Downloads

User Manual