Skip to content

Low Voltage Pro Multifunctional Cable/Network Tester Kit with Smart Remotes - (LVPRO30SR)

$499.99
SKU LVPRO30SR
6 14395 00177 3

Understanding what data and power are on a Cat5/5e/6/6a/7/8 cable is becoming increasingly important as cables are becoming crowded with a wide variety of both data devices and power sources. In fact, knowing what is on a cable before plugging in can protect valuable equipment and speed up new installations. The Power Panel Cat5/5e/6/6a/7/8 DVM is the right tool at the right time because once connected, it goes to work scanning each pin on a connector and displaying both the activity and the pair location (Network devices, phones or Power over Ethernet). And, if you are a VoIP phone of IP camera installer, you will find the Power Panel Cat5/5e/6/6a/7/8 DVM particularly useful because you will know if there is power and a data pair available for your equipment.... exactly what you need to make your device operate. There are 2 Power Panel DVMs to choose from: Inline unit (P/N POE1000IL) The most popular Power Panel Cat5/5e/6/6a/7/8 DVM model. Packed with features for sensing what is on a CAT5/6 cable; switches, phones, PoE power, plus interacts with these devices plus the ability to connect between 2 devices "inline". Inline connections allow passing PoE power to the device monitoring the device while it is ON. Also, the inline Power Panel measures and displays power draw (in watts). Tone Star unit (P/N POE1000ILT) All of the features of the inline unit (above) plus we add our full-featured, filtered probe. The probe is used as a wire locator to audibly trace the tone placed on the wires by the Power Panel main unit. It features a tone button, volume control, ultrabright LED lighted tip, and 2 status LEDs; One to visually identify the tone and the other to warn you that there is 60hz present in the area. Also, filtered to minimize fluorescent hum.

 

Features
  • Designed as a long term practical monitoring device, the Power Panel can remain inline between 2 devices without affecting the communication
  • Plug into any device with an Ethernet plug: computer, switch, VoIP phone, IP camera or access point; Locate the active devices and voltage on the Ethernet cable or port; Display the speed (10,100,1000), duplex and pinouts of the devices
  • Display the PoE voltage and pinouts (if PoE is present)and measure the power usage of the PoE in watts
  • Plug into any device with an Ethernet plug: computer, switch, VoIP phone, IP camera or access point
Product Overview
Specifications
Cable Types Tested (All LVPRO models) Shielded and unshielded twisted pair. All cable categories
Coax. All types
Telephone, speaker and alarm wire 
Cable Tests (All LVPRO models) Opens, shorts, reversals, split pairs, wiremap, propagation
delay,skew, ohms. Feet and metricselectable
Advanced Cable Tests (All LVPRO models) Length and distance to fault
Adjustable and standard VOP settings for accurate length
of all cables
RLQ (Return Loss Quality)
Locating cable ends, split wires and
switch ports (Al LVPRO models)
Wall jack identifiers (RJ45, coax, and mixed kits available)
Speaker identification (Qty 8 available separately)
Port blink. LVPRO lights the LED on the port switch
Device Tests (All LVPRO models) Speakers: audible popper
Voltage Protection (All LVPRO models) DC Volts: 100V
AC Volts: 70
Length Measurement (All LVPRO models) Max (all wire types): 1000 feet (305m)
Min split pairs: 6 feet (2m)
Min RLQ: 20 feet (7m)
VOP calibration:Min cable sample 150 feet (50m)
Upgradeable (Model 20) Length and distance to fault
Adjustable and standard VOP settings for accurate length
of all cables
RLQ (Return Loss Quality)
Network Devices (Models 30 and 30SR) 10/100/1000 advertised speed and cable pairs used
PoE pairs and cable pairs used
CCTV camera video signal: measure peak to peak volts
CATV (cable TV) requires min 30mV peak to peak signal
Battery test:100mA loaded test for 12V alarm and other batteries
Printed Reports Models 30 and 30SR Stores 250 cable test reports in memory
Battery Type: 4 AA alkaline
Life: 24 to 30 hours
Auto power off: 30 minutes
Backlit Display Off and 2 brightness levels
Includes
  • Detachable Remote
  • F Male to BNC Male
  • F Male to BNC Female
  • (2) RJ45 patch cables
  • RJ45 to alligator clip adapter
  • USB cable
  • (4) AA batteries and carrying case
  • Smart Remotes