Power Panel™

The most effective and handiest test instrument has always been the DVM (Digital Voltmeter). Now there is one designed for CAT5/6 Cables and Connectors!

POE1000: STANDARD POWER PANEL
POE1000IL: POWER SENSING INLINE MODEL
POE1000ILT: POWER PANEL TONE STAR


MEDIA

• POE1000 / 1000IL / 1000ILT Power Panel Flyer
• Power Panel PN: POE1000 – Product Manual
• Power Panel PN: POE1000IL/POE1000ILT – Product Manual
• Power Panel - Product Introduction Video
• Power Panel – Product Demo Video
• Power Panel INLINE - Product Demo Video

Description

POWER PANEL INLINE AND POWER PANEL TONE STAR MODELS
CAT5/6 DVM and Network/PoE Tester


Why do you need this tester?

Understanding what data and power is on a CAT5/6 cable is becoming increasingly important as cables are becoming crowded with a wide variety of data devices and power sources. In fact, knowing what is on a cable before plugging in can protect valuable equipment and speed up new installations. The Power Panel CAT5/6 DVM is the right tool at the right time because, once connected, it goes to work scanning each pin on a connector and displaying both the activity and the pair location. Whether it be network devices, phones or Power over Ethernet, all is displayed. And, if you are a VoIP phone of IP camera installer, you will find the Power Panel CAT5/6 DVM particularly useful because you will know if there is power and a data pair available for your equipment…. exactly what you need to make you device operate.


PowerPanel Testimonials


3 POWER PANEL DVM MODELS TO CHOOSE FROM!

Standard unit (P/N POE1000): Packed with features for sensing what is on a CAT5/6 cable (switches, phones, PoE power) plus interacts with these devices.

Inline unit (P/N POE1000IL): The most popular Power Panel CAT5/6 DVM model has all of the features of the Standard unit plus the ability to connect between 2 devices (“inline”). Inline connections allow passing PoE power to the device monitoring the device while it is ON. Plus the inline Power Panel measures and displays power draw (in watts).

Tone Star unit (P/N POE1000ILT): All of the features of the inline unit (above) plus we add our full featured, filtered probe. The probe is used as a wire locator to audibly trace the tone placed on the wires by the Power Panel main unit. It features a tone button, volume control, ultrabright LED lighted tip, and 2 status LEDs: One to visually identify the tone and the other to warn you that there is 60hz present in the area. The probe is filtered to minimize fluorescent hum.


Power Panel - Standard Features
Power Panel - Inline Features


Standard Unit Features
PN: POE1000

  • Scans pins and displays
  • PoE power: Volts, watts, cable pair location, end / midspan
  • Advertised data switch speed
    (10,100,1000 MB/s), duplex
  • Cable pair location.
  • Phones (digital, analog)

INTERACTIVE BUTTONS:

  • VoIP phone and IP camera load simulator
  • Link pulse transmit button

OTHER FEATURES:

  • Tone generation
  • Port beacon
Inline Unit Features
PN: POE1000IL
All the features of the Standard model plus:POWER PASS THRU:

  • Two jacks allow PoE power to be passed to the PoE device so it can be tested.

POWER MEASUREMENT:

  • Placed INLINE between two devices, the power draw of the device can be measured in watts. Too much power draw is the number one reason for IP/PoE network failure.
Inline Unit Features
PN: POE1000ILT
All the same features as the INLINE model plus:AN ILLUMINATED PROBE:

  • The Tone Star model includes a full featured, filtered probe for tracing tones (wire location). The probe offers an ultra- bright LED lighted tip, filtering to block fluorescent hum, volume control, 2 status LEDs, adapters for alarm wire, RJ11,RJ45 and coax connectors.

POWER PANEL MODEL NUMBER INFORMATION

Power Panel Model Number

  • Power Panel CAT5/6 DVM (One of three models)
  • 9V Battery
  • Illustrated Users Manual